Dyson Ball Animal Brushbar Replacement
By Mairead Nye • Difficulty: Easy
Introduction

This is a guide to removing the brush bar for replacement or cleaning.

Step 1
  • Turn off and unplug the vacuum.
Step 2
  • Recline the vacuum on its back and position the brushbar up in the air.
Step 3
  • Pull the red ring around the base of the brush head down and away from the body.
Step 4
  • Pull the brushbar out from the vacuum.
Step 5
  • Pull up the red tabs on the top of the brushbar.
Step 6
  • Remove the front panel of the brushbar.
Step 7
  • Remove the four screws with a Torx T10 Screwdriver.
Step 8
  • Lift the brushbar away from the housing while pulling it out to the side.
  • This may take some force and wiggling.
Conclusion

To reassemble your device, follow these instructions in reverse order.